Liquid Filter Cartridges:Principles, Types and Selection Guide (Pullner Filtration)-Part Two
In modern industrial liquid filtration systems, the liquid filter cartridge is a key component for protecting equipment, stabilizing processes and improving product quality. From ultrapure water and fine chemicals to food & beverage, electronics chemicals and process water, the right liquid filter cartridge has a direct impact on production efficiency and total operating cost.
This article is prepared by Pullner Filtration, a factory-based cartridge filter manufacturer in China, to give overseas customers a clear and practical introduction to liquid filter cartridges and help you select the right solution for your application.
4. Key Technical Parameters of Liquid Filter Cartridges
When comparing liquid filter cartridges from different suppliers, several key parameters should be carefully checked:
-
Micron rating – usually expressed in microns (μm), and divided into absolute and nominal ratings. Absolute-rated cartridges provide stricter control of critical particle size, and are recommended for final safety filtration and bacteria reduction.
-
Size and connection – standard lengths include 10", 20", 30" and 40", with standard and high-flow diameters. End cap styles (such as 222/226, flat end, fin end etc.) and connection types must match your existing filter housings to avoid bypass and leakage.
-
Media and core materials – PP, PES, PTFE, nylon, glass fiber and others each have their own chemical compatibility, temperature resistance and mechanical strength. Proper material selection depends on the chemical nature and temperature of the liquid.
-
Max operating temperature and pressure – these parameters determine whether the cartridge can safely work under high temperature, pressure fluctuation and steam sterilization (SIP) conditions.
-
Dirt-holding capacity and differential pressure performance – they directly affect cartridge lifetime and overall operating cost. Monitoring inlet and outlet differential pressure and replacing cartridges at the recommended ΔP value helps ensure filtration performance and equipment safety.
5. How to Select the Right Liquid Filter Cartridge?
For overseas engineering companies, equipment manufacturers and end users, liquid filter cartridge selection is a balance between technical performance and economic efficiency.
First, clearly define the filtration goal: Is it pre-filtration, fine clarification or final bacteria reduction? Different goals require different micron ratings, structures and media.
Second, understand the properties of the process liquid in detail: media type (water, solvent, acid, alkali, oil, etc.), temperature, viscosity, pH, solids content and particle distribution. These factors have a strong impact on media choice and cartridge life.
Different Filter Cartridges Structures:
Third, combine required filtration precision, system flow rate and acceptable differential pressure to calculate the number of cartridges and select a suitable housing design. In practice, Pullner Filtration recommends evaluating the Total Cost of Ownership (TCO) of the system instead of only comparing the unit price of a cartridge. A higher-performance cartridge may have a slightly higher price, but longer change-out intervals, lower energy consumption and more stable process operation often result in much lower overall cost.
Filter material microstructure:
For industries such as food & beverage, pharmaceuticals, bioprocessing and electronics ultrapure water, it is also important to check whether cartridges meet relevant regulations and certifications (e.g. food contact standards, USP-class-related standards). When needed, Pullner Filtration can provide integrity testing and validation support to ensure process safety and regulatory compliance.
6. Installation and Maintenance Tips
Correct installation and maintenance are essential for reliable cartridge performance. Make sure that cartridge end caps and housing interfaces are fully matched and well sealed. Always install according to the flow direction arrow to avoid reverse installation, which may reduce filtration efficiency or damage the internal structure.
When starting up or changing operating conditions, avoid sudden high pressure shocks. A slow and smooth ramp-up of pressure and flow allows the cartridge to enter stable working condition and decreases the risk of damage.
During operation, use a differential pressure gauge to monitor the pressure drop across the cartridge. As contaminants accumulate, ΔP will gradually increase. When it reaches the recommended change-out value, replace the cartridges or clean and regenerate washable types in time. This helps prevent cartridge rupture and protects upstream equipment and processes.
PRI-Housing Installnation:
7. Typical Applications of Liquid Filter Cartridges
In the electronics and semiconductor industry, liquid filter cartridges are mainly used in ultrapure water systems, chemical distribution systems and wet process steps such as developing, cleaning and etching. These applications demand extremely low extractables, excellent particle cleanliness and stable micron performance.
In pharmaceuticals and bioprocessing, cartridges are used for WFI (water for injection), process water, intermediates and final product clarification or sterile filtration. Final cartridges are usually integrity-tested before shipment and regularly tested on-site to support GMP compliance and batch-to-batch consistency.
In the food & beverage sector, liquid filter cartridges are used for mineral water, beer, wine, juices and dairy products, providing clarification and microbiological control while meeting food-contact safety requirements.
In fine chemicals, coatings and inks, cartridges remove particles and colloids to prevent coating defects and nozzle blockages. In water treatment and environmental protection, melt blown and high flow cartridges are widely used in process water, circulating water and wastewater reuse systems as key filtration stages.
8. Why Work with Pullner Filtration?
Although a liquid filter cartridge looks simple, it plays a crucial role in different processes and industries. Pullner Filtration has long been dedicated to the field of liquid filtration and separation, offering complete cartridge solutions from pre-filtration to high-precision final filtration. Through optimized media design, precise manufacturing and strict quality control, we help customers build stable and cost-effective liquid filtration systems.
As a factory-based company, Pullner Filtration owns its own production facilities and complete manufacturing system. We are equipped with professional laboratory and testing equipment to evaluate key parameters such as filtration efficiency, flow–pressure characteristics and chemical compatibility. This allows us to provide reliable technical data and customized testing according to your specific process needs.
Our plant also has ISO19001, ISO14001, ISO45001 certificates, we are high-tech enterprise with multiple patent certificates. Approval vendor of Saudi Aramco.
With many years of export experience, we understand the requirements of global markets and international certifications. We support engineering companies, OEM equipment manufacturers and end users with flexible OEM / ODM services and one-to-one technical support.
If you are planning a new liquid filtration project or optimizing an existing system, you are welcome to contact the Pullner Filtration sales team. Simply share your basic process conditions and target specifications, and we will recommend suitable liquid filter cartridge configurations, provide samples for testing and offer continuous technical service—helping your system achieve higher efficiency and lower total cost under safe and stable operation.
Address : 8th Building, No.1132 Maoting Rd., Chedun Town, Songjiang District, Shanghai 201611, China
Factory Address : 8th Building, No.1132 Maoting Rd., Chedun Town, Songjiang District, Shanghai 201611, China
Worktime : 8:00-17:00(Beijing time)
Business Phone : 86-021-57718597(Working time) 86--19810756858(Nonworking time)
Fax : 86-021-57711314
Contact Us :Pease Send your inquiry directly to us:
Contact Person : Miss. Lucy
Job Title : Sales Manager
Business Phone : 86-21-57718597
Skype : lucyshao-pullner
Email : lucyshao@pullner.com
Contact Person : Mr.Hudarm
Job Title : Salesman
Business Phone : 86-18311506837
Email : hudarm@pullner.com
Por favor verifique seu email!
Portuguese
